DigiTrak Falcon guidance systems are the worldwide standard for performance. Falcon allows crews to measure active interference across hundreds of frequencies and choose the best ones to use. With a single transmitter, Falcon technology outperforms multiple fixed-frequency transmitters. Increase your uptime and decrease the risk of tripping out.
ABOUT Locating Systems
Overcome one of the biggest obstacles to completing your underground drilling projects.

F5
- Wideband technology evaluates hundreds of frequencies for the best possible performance around active interference
- Ultra-low frequency options for battling passive interference on the jobsite
- Scan for interference, select optimum frequencies, and pair transmitter at the jobsite
- Switch between paired bands mid-bore
- Full Scale Sensitive Pitch provides 0.1% resolution through ±99.9% slope for precision grade work
- Max Mode filters noise to boost weak data signals and stabilize depth readings
- Standard warranty for 19- and 15-inch transmitters is 3 years/500 hours
- Traffic signal loops
- Overhead power
- Concrete with rebar
- Unseen interference sources
Get the most bang for your buck. Active Interference Analysis Frequency Optimization (125 ft depth/150 ft data range) Sub-k™ rebar capability

F2
- Falcon frequency optimizer helps overcome active interference
- One Falcon F2 wideband transmitter supports multiple frequencies from 4.5 kHz to 45 kHz
- Infrared pairing of receiver and transmitter
- 0.1% precision pitch for completing critical grade bores
- 12-position roll clock with roll offset
- Max Mode noise filtering boosts fringe data and stabilizes depth readings
- Increased power in a 15 in. transmitter for industry-best 30 m depth and 38 m data range
- Supports Remote Steering on FCD and Target Steering with Aurora® touchscreen display

F1
Designed for projects such as house drops from street to home, the easy to use and friendly priced F1 uses a single band to combat active interference.- Falcon frequency optimizer helps minimize the impact of active interference
- The Falcon F1 single-band transmitter supports frequencies from 9.0 kHz to 13.5 kHz
- Infrared pairing of receiver and transmitter
- 0.1% precision pitch for completing critical grade bores
- Max Mode noise filtering boosts fringe data and stabilizes depth readings
- 12-position roll clock with roll offset
- Compatible with DigiTrak Aurora® touchscreen display

Aurora
- 10.4 or 8.4-inch color touchscreen interface
- Wi-Fi and Bluetooth® connectivity
- Supports current DCI walkover receivers
- Configurable alerts, data trending, and onboard training
- Runs multiple apps simultaneously
- GPS-enabled for future apps
- Supports fluid pressure monitoring, TensiTrak® pullback system, and SST® steering tool

Transmitters
Digital Control's single and multi-frequency transmitters send pitch, roll, depth, and temperature information to our receivers. Choose the one best suited to your system and job requirements.- The first and only sub-kHz frequencies in the industry for battling passive interference on the jobsite
- Falcon evaluates hundreds of frequencies for the best possible performance on every bore
- Scan for interference, select optimum frequencies, and pair transmitter at the jobsite
- Switch between paired bands mid-bore
- Full Scale Sensitive Pitch provides 0.1% resolution through ±99.9% slope for precision grade work
- Max Mode filters noise to boost weak data signals and stabilize depth readings
- Standard warranty for 19- and 15-inch transmitters is 3 years/500 hours